Musser Parts
Filters
-
Musser Wing Nut for damper spring 5/16-18 X 1-3/16
SKU: E2477MusserMusser Wing Nut for damper spring 5/16-18 X 1-3/16
-
Musser Grommet 10 Pack
SKU: E0565TMusserReplacement rubber grommets for Musser marching xylophones & marimbas, such as the M39, M42, and M61. Sold in packs of 10.
-
Musser 5/16-18 Plastic Thru-Hole Knob
SKU: E9784MusserMusser E9784 Thru hole knob Plastic 5/16-18 thread
-
Musser Upper Pull Rod - Gold
SKU: E34741MusserMusser upper pull rod for Vibraphones and Chimes. 1/4" diameter and 21-1/2" long.
-
-
Musser Damper Felt for 1-1/2" Chimes - 10 Pack
SKU: E7324TMusserMusser concert chime damper felt. 10 Pack. For M665B and M661C chime sets with 1-1/4" tubes.
-
Musser Motor Knob
SKU: E3630MusserReplacement control knob for modern Musser vibraphone motor control panel. Fits a 1/8" diameter post. May not fit some older models of Musser vibra...
View full details -
-
-
Musser Vibraphone Motor Control Unit
SKU: E3634MusserReplacement motor control unit for modern Musser vibraphones. * Your vibraphone must have the motor with the white six-pin connector to work with t...
View full details -
Musser Damper Felt for 1-1/4" Chimes - 10 Pack
SKU: E7323TMusserMusser concert chime damper felt. 10 Pack. For M635B and M635C chime sets with 1-1/4" tubes. These felt strips are also used on the M75 & M75LH...
View full details -
Musser Adjustable Leg Insert
SKU: E6160MusserMusser adjustable leg insert for use on frames built from 2001 and later.
-
Musser Damper Felt for M44 Vibraphone
SKU: E3358MusserMusser replacement vibraphone damper felt for M44 vibraphone. 37-5/8" long. Includes adhesive backing.
-
Musser 6 Coil Damper Spring in Black Oxide Finish
SKU: E45881MusserReplacement 6 coil damper spring for Musser M44 vibraphones. Black oxide finish.
-
Musser Post Insulators 1/2" x 11/16" 10 Pack
SKU: E0300TMusserMusser Insulator 10 Pack. 1/2" x 11/16"
-
Musser Replacement Rail Felt for M2044 Bell Lyra
SKU: E8394M2044MusserReplacement rail felt for Musser M2044 bell lyra. Holes are punched specifically for the M2044 model. 4 strips included. 23 1/4" long 9/16" wide a...
View full details -
-
Musser Replacement Wooden Case for M645 & M656 Bells
SKU: E0224MusserReplacement wooden case for Musser M645 Classic Steel Bells & M656 Concert Band Aluminum Bells.
-
Musser Replacement 3" Caster w/ Brake for Older Fixed-Height Frames
SKU: E0136MusserReplacement 3" caster with brake for older Musser fixed-height frames built before 2001. Designed for frames with an inside width of 7/8". Note: T...
View full details -
Musser Vibraphone Shaft Pulley Assembly
SKU: E33281MusserMusser vibraphone shaft pulley for pulsators. 1-1/8" outside diameter 7/8" approximate diameter inside groove (for belt) 1/2" thick 1/4" insi...
View full details -
Musser E0408 1/8" X 6" Vibe Motor Belt for M48 M75
SKU: E0408MusserMusser vibraphone motor belt for M48 and M75 models. Dimensions are 1/8" x 6"
-
-
-
Musser Mounting Bracket for Diagonal Braces
SKU: E4491MusserMusser Mounting Bracket for Diagonal Braces. This is the point on the frame where the diagonal leg braces mount.