Parts

Replacement bracket for Ludwig Pocket Kit floor toms. Black finish. 1-1/2" hole spacing. Includes mounting screws.

Chrome plated badge grommet for vintage and modern Ludwig air vents. Fits any style  badge.  1/2" (.535") long and 3/8" (.405") diameter.  

Pearl LG-04S 9.5mm memory lock for use on floor tom legs with the Masters LB40 bracket. The flat design of this stop-lock also works great with man...

Replacement rubber grommet for DSS tom suspension systems. Grommet is 7/16" thick and 3/4" round. Will fit other brands of suspension mount as well.

Roc-N-Soc Rubber Feet for Spindle & Nitro Thrones. Sold in packs of three. Opening is 5/16" x 3/4"

Gretsch G4820V vintage diamond plate floor tom bracket in chrome finish. These will retrofit older kits. This bracket holds 9.5mm (or 3/8") tom leg...

Gretsch TechWare tom and floor tom bracket used classic '80s & '90s drums as well as some recent Catalina series drums. Fits 12.7mm l-arms ...

The Worldmax Floor Tom Suspension System is an excellent way to isolate your drum from traditional resonance robbing legs and brackets. The suspens...

Gretsch G4825 Diamond Floor Tom Bracket. Comes with Memory Lock and mounting screws. Designed with mounting points to fit multiple hole spacings. W...

1-5/8" Tension Rod * Tension rod length is measured from under the bolt head to the end of the threads.

Gretsch Lightning snare drum butt plate in chrome finish. Includes mounting screws. Hole spacing is 1-3/8". Will retrofit all vintage and modern G...

Gibraltar G3GCP-RC replacement cajon pedal cable. Designed to work with the new G3GCP cajon pedal, but may work with earlier 1st generation models ...

This is the replacement Gretsch bass drum tom holder mounting bracket for USA Custom drums as well as various older Renown & Catalina series dr...

Gretsch G5380 Microsensitive snare drum throw-off. This is a modern redesign of the classic throw-off from the 50's & 60's. This latest version...

Ludwig 9.5mm (3/8") quick-set memory lock for use with the P1216D tom bracket. Works great for mounted toms as well as floor tom legs.

This is the replacement Gretsch bass drum tom holder mounting bracket for USA Custom drums as well as various older Renown & Catalina series dr...

Ludwig large classic tension lug. Includes mounting screws and gasket. 1-11/16" hole spacing.

Gretsch double ended snare lug used on current Catalina series snare drums. Includes gasket and mounting screws for mounting to a wooden shell - so...

Pearl replacement PL08 nylon bushing for 900 series stands. Fits in the base assembly that holds a 7/8" tube -- this would be the lower section of...

Gretsch Lightning snare drum throw-off in chrome finish. Includes mounting screws. Works as a replacement for modern Gretsch USA built snare drums....

Replacement rubber foot for 9.5mm (3/8") floor tom legs, such as the Ludwig P1785A.

Threaded Air Vent for the breather hole on drum shells. Creates a clean finished look. The air vent is 5/8" long and will fit a shell up to about 7...

Replacement snare lug for PDP Concept series snare drums. Includes gasket and mounting screws. Accepts TP30 TruePitch tension rods.

Replacement lug for the original Ludwig Accent Series toms and floor tom, but will work with many other series and brands. Comes complete with moun...

Gretsch vintage stamped bass drum claw. Sold individually.

Gretsch was the originator of the die-cast hoop. Their strength and rigidity allows for easier tuning, crisper rim shots & cross-sticking, and ...

Small Threaded Air Vent 3/8" - Chrome

Gretsch tom lug used on Catalina & Blackhawk series drums in chrome finish. 15/16" hole spacing. Includes mounting screws and gasket. Note: The...

Gretsch vintage disappearing bass drum spurs. Mounts into a 5/8" hole. Sold in a pair and includes all hardware for mounting.

1-3/4" Tension Rod * Tension rod length is measured from under the bolt head to the end of the threads.

Gretsch replacement 42 strand snare wire set for 14" snare drum. Chrome finish.

Clear poly-vinyl straps for mounting snare wires. Sold in pairs.

Replacement set of bass drum spurs used on the current USA model Gretsch drum sets. Sold only as a pair. Includes gaskets and mounting screws. Moun...

Replacement brass air vent used on Gretsch drums. 7/16" tall & 5/16" diameter.

Ludwig eye bolt, washer & wing nut assembly used on the modern P1216D tom & floor tom leg bracket. Includes a P1632 eyebolt, P2952 wing nut...

DW replacement lug screws with star washers. Standard 10-24 thread x 5/8" long. Sold in packs of 10.

Gasket for P2243B Ludwig large Classic Lugs.

Small rubber tip to fit 9.5mm floor tom legs as well as other parts like classic 3/8" bass drum spurs. Will also squeeze onto 10.5mm legs as well.

Gretsch Drum Internal Tone Control G5540. Add to a new drum or use as a replacement - fits Gretsch drums from the 50's to current models.

Replacement wing bolt for vintage Ludwig Speed King pedals. The 5/16-24 thread will also work on other vintage hardware, such as Slingerland & ...

Gretsch 12.7mm floor tom leg used on USA model drum sets. Works with any bracket that accepts 12.7mm (or 1/2") legs. Chrome finish.

Replacement rubber crutch tip for DW 12.7mm (1/2") floor tom legs. Sold individually.